SMART Repair

Innovative products for repairing scratches, dents, scuffs and more

SMART Repair

Innovative products for repairing scratches, dents, scuffs and more Improve customer loyalty through exceptional service

The SMART (Small Medium Area Repair Technique) concept and the technology that supports it, were originally created to offer the motor industry a fast, cost-effective yet environmentally friendly solution to assist in the cosmetic repair of vehicles. When only the best will do Types of damage that are suited to SMART repair include: scratch repair, dent repair, alloy wheel repair, alloy wheel refurbishment, exterior trim repair and bumper repair. The chemicals and products used in the SMART repair industry have taken significant strides forward in recent years along with the introduction of state of the art specialist equipment.

2 in 1: The advantages of the SMART repair method with KENT

Make your customers happy by saving them money in the long-term leading to increased loyalty Achieve better results with premium products that improve your workflows leading to lower costs

KENT always stretch boundaries as we strive to offer the very best products and support. Our products have an excellent reputation and we pride ourselves on uncompromising quality, well-known reliability and relentless innovation. With over 75 years of experience in the industry, we are valuable and loyal partners and quite simply, our products make the job easier and produce better results. We learn every day whilst refining and improving our products and services in the pursuit of perfection.

That’s the KENT promise

The many benefits of KENT With market leading products and highly personalised support we enable our customers to enhance workflows and generate new business especially for SMART repair. We provide more than just products. We provide solutions that allow you to perform to your best.

Better results With our quality promise, we’re one step ahead so YOU can be one step ahead. Providing visible, measurably better results for SMART repair

Efficiency & Savings As well as impressive results, our products can be more economical or faster to use and not only enhance your workflows, but also save YOU money

Health & Safety Working with chemicals, you always need to have an eye on official regulations and compliance. We have products that are safer to work with and help YOU avoid any unnecessary health risks

Contents

Bodywork pre-treatment cleaning and masking

Bodywork filling getting things even again

10.

Bodywork priming the perfect match before the paint job Bodywork finish edge blending, sealing and protective coating

12.

16.

Plastic pre-treatment promoting adhesion

18.

Plastic repair the right product for the right part

20.

Plastic finish special OEM finishes Wheels alloys good as new Headlights back to full luminosity

22.

23.

Bodywork Cleaning & Masking

Good preparation is a prerequisite for the right damage assessment and perfect finishing. Use Acrysol (83930, 83925, 83945) to remove contamination like waxes, silicones, paint sealings, tar and tree resin etc. from coatings and metal. To clean all other surfaces, or for better dust removal in between and after sanding use Panel Degreaser (86213, 86214)

DS SPONGES Abrasive sponges that are easy to use on profiled surfaces without risking peeling edges. They create an excellent substrate refinish.

EFFICIENCY & SAVINGS Special sanding sponges that last 3 TIMES longer than standard products, saving YOU time & money

Will not crease or deform and soft edges mean no risk of damage to those awkward contours around alloy wheels, bumper vents or door handle recesses

3 versions available that can be used wet or dry (best results when dry)

Composed of aluminium oxide-silicon carbon so reduced clogging and gumming

Part number(s):

A1467 A1468 A1469 A1475

P320/500 (brown) P600/1000 (green) P1000/1500 (purple) Mixed box - 10 of each

30 sponges 30 sponges 30 sponges 30 sponges

JAPANESE MASKING TAPE Our most universal and easy to remove masking tape that can do nearly every job Highly accurate masking made easier - ultra thin profile means valuable space is not taken up by chunky tape allowing the paint to flow with no hard edges and no residues left behind Unsurpassed adhesion to difficult plastics and rubbers – less overspray and re-work Can be used as a flip masking tape to ease the job of painting swage lines on vehicles

Part number(s):

85778 85779 85780 85781 85782 85783 85784

6mm x 50m 9mm x 50m 12mm x 50m 19mm x 50m 25mm x 50m 38mm x 50m 50mm x 50m

pack of 6 pack of 5 pack of 5 pack of 3 pack of 3 pack of 3 pack of 3

Excellent paint break line - No wrinkling or tearing

Fits very well curves surfaces & corners as well

TOP TIP For heavy contamination it is recommended to wash the car first with sufficient water (high-pressure cleaners) in combination with our Smoother (86346) & Smoother Sponge (86625) . For a special 3-in-1 action that includes cleaning, degreasing & abrasion use our Abraprep (85754) – great for applying a key for painting and works especially well with harder OEM lacquers.

CU lnei av en ri ns ga l

Get to know all details about ou suitable for eve

Part No.: 86942 – 1,8 kg tin (yellow) Part No.: 86945 - 1,5 kg cartridge (yellow)

ULTRA MULTI FIBRE Part No.: 86940 – 1 l tin (bright yellow)

ULTRA MULTI

A multi-purpose solution for most daily applications

Our best putty in the range that can do it all Combines the advantages of Ultra Multi & Ultra Fibre

Polyester putty with very good shaping properties Can be applied in multiple layers on any size and is still easy to sand Designed for use on steel, aluminium, galvanised, GFRP and carbon surfaces

Super light and very creamy putty with glass fibres that ensures tremendously easy sanding - can be used directly under filling primer Designed for repairs on moderately to severely damaged steel, aluminum, galvanised, GFRP and carbon surfaces while increasing mechanical strength

The plastic filler specially designed for plastics ULTRA PLASTIC Part No.: 86958 – 1 kg tin (light grey)

Part No.: 86957 – 1 kg tin (dark grey)

ULTRA FLEX

Made with soft resin to provide higher smoothness and flexibility Used for filling small uneven spots and scratches Designed for use on plastic and carbon surfaces,, including polypropylene where modelling and shaping is needed The plastic shaper – specially designed for more flexible plastics

Uniform and fine consistency en- sures easy applying and sanding Used to level dents, scratches and depressions Designed for use on plastic surfaces, including polypropylene where more filling is needed

Plastics

Special

ur whole new bodyfiller range – ery vehicle type

Part No.: 86941 – 1,8 kg tin (metallic grey) Part No.: 86944 - 1,5 kg cartridge (metallic grey) 86961 86962

ULTRA FIBRE Part No.: 86959 – 1,8 kg tin (blue)

ULTRA ALU

THX

Made with aluminium pigments that provides the unique appearance The unique viscosity makes it very easy to spread and shape edges Designed to fill dents and other imperfections of steel and carbon exposed to higher temperature and mechanical loads Liquid metal – special alu filler with metal appearance for the easiest sanding of all alu fillers

Special fibre filler for strengthening and straightening damaged surfaces

Made with glass fibres to ensure a high flexibility and easy sanding Can be used for filling holes and imperfections Designed for use on steel, aluminium and GFRP

Part No.: 86943 – 1,8 kg tin (white) Part No.: 86946 - 1,5 kg cartridge (white)

NST RAPID SAND Part No.: 86744 – 1 kg tin (green)

ULTRA FINISH

No styrene filler – our multi-purpose alternative without styrene

Made with soft resin to provide that incredible fine application Used for filling uneven areas and damages in paintwork and finish surfaces previously repaired with other fillers and putties Designed for all surfaces and visible areas The fine finisher – a very fine and smooth putty

Styrene free - prevents bad smells and reduces health risks caused by styrene Creamy texture provides a perfect pinhole-free coating with good flexibility Designed for use on steel, aluminium, galvanised, GFRP and carbon surfaces

Special

ULTRAFILL 3 A new generation aerosol primer/filler that does it all. No more pre-treatment, convenient application and excellent adhesion, even on “difficult” plastics like PP

EFFICIENCY & SAVINGS Streamline your workflow with an aerosol primer/filler that has superior adhesion to metal and plastics, even problematic PP with no pre-treatment required

More economical, saving you money - up to 3x thicker per layer than standard products Increased viscosity, reduced solvent thinners improves build and laydown - fills fast, saves material and time Provides huge efficiency gains for the body shop - designed to be used on larger, more challenging repairs without the need for baking/booth time and the associated processes and costs that go along with that Highly flexible, resistant to cracking & physical stress forces - no delamination, paint film unaffected

Part number(s):

87051 (black) 87052 (grey) 87053 (white) 87054 (red) 87055 (blue) 87056 (yellow)

500ml 500ml 500ml 500ml 500ml 500ml

Aerosol can Aerosol can Aerosol can Aerosol can Aerosol can Aerosol can

CROSS HATCH TEST DIN ISO 2409

Ultrafill 3 Extraordinary performance on PP + EPDM with no pre- treatment

Ultrafill 2 Good performance on PP + EPDM with no pre-treatment

Standard Product Low performance on PP + EPDM with no pre-treatment

Did you know that our new formulation has perfect “ISO 0” (zero paint removal, ISO 2409) cross hatch adhesion to polypropylene composites, as well as excellent inter-coat adhesion with water-based refinish paint?

SPOT PRIMER Perfect for rub-throughs. True wet on wet primer with the same adhesion to bare metal as an etch and straight on to bare plastics. Adhesion promoters built in.

Specially designed for bare metal spots and exposed filler

Fast drying, excellent adhesion, easy sandability for sanded- through spots

Part number(s):

86334 (black) 86335 (grey) 86336 (white)

400ml 400ml 400ml

Aerosol can Aerosol can Aerosol can

2K CRYSTAL CLEAR A crystal clear, extremely durable chip and UV-resistant 2K clearcoat providing 2K technology results in one aerosol can

EFFICIENCY & SAVINGS Ready to use 2K technology in a 1K can, saving you up to 60% of prep time compared to mixing and cleaning 2K clear coats and gun

Due to its special formula no hardener is needed as it uses the humidity of the air to activate the hardening before cross-linking with the surface to form the 2K finish No pot life - No wasted paint Extremely durable - Chemical, UV and scratch resistant Wide field of application - OEM finish, old paints, bare aluminum, bare & galvanized steel, wood

High / hard dry film thickness - Great polishing ability Forms a deep and shiny surface - No risk of dripping

Part number: 84125

500ml

Aerosol can

HERE’S HOW IT WORKS

LACQUER REPAIR SPRAY Fade out thinner for invisible blends on clear coats. A must have product for smart repair when the repair is kept to a minimum. Leaves the blend shiny so less refinishing work required afterwards.

Dissolves clear coat masking edges - No need for 2k fading

Ultra fine mist fan pattern prevents over application to ensure consistent results - perfect and soft finish

Part number: 84125 500ml

Aerosol can

In the transition area from old to new laquer use Lacquer Repair Spray (84125) . Apply it from the new to the old coating and in thin layers. After each layer wait and see how the product flows on the surface to avoid any running. Allow time for the product to fully cure – this has a strong influence on the success of the coating.

TOP TIP Make sure the area where the lacquer is applied is free of all contaminants . Prior polishing facilitates subsequent reworking, ensures a smooth transition and prevents tear-off edges. The polished area must be degreased before the paint process starts. Applying Orange Fine Line Tape (85720 etc.) in the final step allows you to quickly and easily remove the tape directly at the edge of the clearcoat without having to remove all the masking material. Mask the repair area before and cover the contours with the tape.

NANO GRAPHENE COATING Graphene infused coating that forms a strong chemical bond with the surface giving up to 365 days of protection against environmental effects.

BETTER RESULTS Special graphene formula provides up to 365 days of extraordinary protection compared to standard products

Special Flairosol® spray makes a very fine mist ensuring an incomparable pattern that saves up to 10% of product compared to conventional sprays and near complete emptying (98%). Forms a special coating instead of “just” sealing or polishing the paintwork Can be layered within 3mins of original application to boost scratch and abrasion resistance Incredible high-slip finish helps to maintain and enhance the dramatic and magical ‘Lotus-Leaf’ water beading effect to repel water and dirt build up Rapid Protection - Protective coating for rapid sealing of most exterior surfaces

PROTECTION DURABILITY

Part number: 84125

500ml

Aerosol can

Upside down Bag-in-bottle system allows 360° spraying for hard-to-reach areas and maximum convenience

Fine mist Mist-like spray adheres perfectly even, without gaps and perfectly. Up to 10% material savings thanks to special spray device

Airless Absolute air isolation prevents contamination and ensures better results

Even spray pattern Product within is reliably ejected thanks to pre-compression technology

EXTREMELY LOW WASTE Special technology empties the bottle by almost 98%

LONG LASTING SHINE A specially developed polish sealant based on nano- technology which produces a superb high gloss finish.

Longer lasting protection compared to Showroom Glaze but far less than Nano Graphene Coating Can be used as a paint cleaner in combination with Smoother or Smoother Sponge or New Auto Clay (for heavy contamination)

Part number: 85403 500ml

Spray bottle

PROTECTION DURABILITY

SHOWROOM GLAZE High gloss professional product that produces a deeply impressive shiny finish on hard surfaces. High gloss finish with long-lasting effects perfect for cars in dealers’ showrooms Cleans light contamination such as fingerprints, polishing residues, water droplets, dust and more

Part number: 84954 500ml

Spray bottle

PROTECTION DURABILITY

Plastics Getting the plastics on a vehicle looking factory fresh is easy with KENT . Interior or exterior, bumpers, dashboards, centre consoles, spoilers; the list goes on and on. They all get a new lease of life. Our specialist products are renowned for recreating original OEM finishes and are some of the very best on the market, relied upon by professionals up and down the country every single day.

PLASTIC PREP Fast drying cleaner to draw out oils from plastic surfaces giving the best substrate prep possible Cleans deep into pores - improves the keying of coating products, such as Plastic Paint, Plastic Dressing, Spray Dye + Quick flash off - solvent does not affect adhesion of coatings, no harsh effects on plastic

Part number(s):

34699

400ml

Aerosol Can

PLASTIC ADHESION PROMOTER Apply to plastic parts after plastic prep and before any of the featured adhesives. Creates a seal which prevents furthers oils leeching from plastics and effecting the bond strength over time.

Ready for use adhesion promoter - Improves adhesion on various difficult substrates Quick drying - fast repair time

Part number(s):

85828

400ml

Aerosol Can

PRR 2 RIGID & PRO 2 TPO Our specialist plastic repair products tailored to suit specific types of plastic / parts.

PRR 2 RIGID

Harder and easy to shape, this lends itself well to headlamp brackets, fan cowlings and any other hard plastics. Becomes as flexible/resistant as bumper - a permanent repair that won’t “pop-out” even when subject to extreme stresses

Part number:

84001

50ml

Dual Cartridge

PRO 2 TPO

For repairing modern, recycled and difficult to bond plastics. This makes it our most universal repair adhesive. Use for TPO (Thermoplastics) like polypropylene (PP), polyethylene (PE)

Part number:

84003

50ml

Dual Cartridge

SEMI FLEXIBLE EPOXY Unique and specialised. Modern recycled plastics are getting harder to bond due to increased oil content. This is our most advanced adhesive for plastics. Slow curing and grey in colour is unusual but its strength comes from its flexibility which gives great resistance to cracking and fracturing once cured. Can be used as your adhesive and your filler in one. Apply in thick or thin layers without any loss of flexibility An excess amount can be applied to the surface and smoothed for sanding as a plastic finishing filler all in one

Part number(s):

86448

50ml

Dual Cartridge

TURBO & PREMIUM PU REPAIR LE Fast curing, micro emission, easy to use structural 2K polyurethane adhesive for small, quick and durable assemblies and repairs

Bonds most plastics, metals, wood etc. – universal applications for bonding and gap filling for bumpers, plastic clips, housings and more

30 and 50 seconds,1.5 and 3.5 minutes open time to suit your needs / application

Part No.

86703 86704 86705 87004 87005 86392 86393

Turbo PU Repair LE 30 sec (black) Premium PU Repair LE 1.5 min (black) Premium PU Repair LE 3.5 min (black) Premium PU Repair LE 1.5. min (white) Premium PU Repair LE 50 sec (transparent)

50 ml cartridge (+ 2 noz.) 50 ml cartridge (+ 2 noz.) 50 ml cartridge (+ 2 noz.) 50 ml cartridge (+ 2 noz.) 50 ml cartridge (+ 2 noz.)

6 mixing nozzles 50 mixing nozzles

HEALTH & SAFETY The EU REACH committee imposed a restriction on isocyanates in chemicals as they are considered to be carcinogenic. This restriction will require the training of users of products containing more than 0.1% of isocyanates as of August 23rd 2023. Our PU Repair range contains less than 0.1% and has no H351 and no GHS08 symbol with full REACH compliancy

PLAZ TEX BLACK PLAZ TEX CLEAR 2 Coarse plastic texture sprays for recreating any OEM finish.

BETTER RESULTS The original OEM finishes (orange-peel structure) that can be achieved makes a real difference when working on scratches as well as larger areas where filler was applied

Enables plastic texture repairs so there’s no need to replace plastic parts unnecessarily

Ideal for dashboards and bumpers

Produces a coarse or fine surface structure depending on the application

Part number(s):

Quick drying so you can work fast

Plaz Tex Black Plaz Tex Clear 2

86735 84586

400ml 400ml

Aerosol can Aerosol can

Compatible with all common paint systems

DID YOU KNOW... ... you are in total control of the final structure / appearance by adjusting the spray distance

... no primer is needed to obtain the perfect OEM finish

... besides impressing your customers with the results, you’ll be working faster and smarter

LONGLIFE EXTERIOR PLASTIC TREATMENT Effective silicone free exterior plastic conditioner for treating badly stained or faded exterior plastics.

Long lasting effects unaffected by water or rain streaks

Excellent coverage and easy to use

Part number(s):

85749

500ml

Aerosol can

BETTER RESULTS

PLASTIC PAINT A range of aerosol paints in 4 colours for re-colouring plastic components.

The 4 colours match most OEM standard colours for plastic parts. Perfect for SMART repair

Suitable for most plastics

Quick and easy with no mixing required nor any wastage

Excellent coverage with each coat saving time

Compatible with leading paint systems

Part number(s): 83795 (Black)

500ml Aerosol Can 500ml Aerosol Can 500ml Aerosol Can 500ml Aerosol Can

83796 (Dark Grey)

83797 (Grey)

83798 (Light Grey)

Wheels It doesn’t take long for a vehicle’s wheels to get tired and dirty and in serious need of some TLC. Exposed to the elements all day, every day, the wheels need regular care and the right products to keep them looking at their best. That’s where KENT comes in . Tried and tested products which are simple to use and produce amazing results . First time, every time.

WHEEL SPRAY SILVER WHEEL RIM SILVER Premium silver paints to finish off your SMART repair on wheel rims and covers

Wheel Rim Silver Wheel Spray Silver

Glossy finish

Matt finish

TOP TIP A special tip for small repairs is our instant adhesive 2K Super Bond (86663) that can be used for chips or around the edge when alloy wheels get kerbed. It is quick, instant, easy to flat when cured and can be over- painted keeping the repair small as it is transparent (body fillers are normally not).

Impressive results on all metals - including aluminium

Very good resistance to UV / ageing, petrol, diesel, oil and car wash (including pressure wash)

Replicates OEM finishes

Part number(s):

84329 - Wheel Rim Silver 86519 - Wheel Spray Silver

500ml 500ml

Aerosol can Aerosol can

Headlights The headlights of a vehicle are permanently exposed to a number of degrading factors. Stone / chip damage, direct sunlight, damage during parking, improper care and other mechanical influences can degrade the surfaces over time.

BETTER RESULTS

The special three-part composition removes scratches completely leaving a polished finish and perfect restoration with up to 100% luminosity

3K LIGHTS CLEAR COAT KIT A kit to restore and renew brightness to any plastic, polycarbonate or makrolon car lights.

Excellent adhesion to plastics and organic glass – does not affect mechanical resistance of the substrate Prevents yellowing and resists aging High UV protection for a long-lasting result

THE KENT SOLUTION

Part number: 85792

• Good value, economical solution with fast results • No replacement parts needed Compared to a replacement KENT saves you money!

Kit contains

1 x Light Clear Coat (200ml) 1 x Light Clear Coat Hardener (100ml) 1 x UV Protector (100ml) 2 x 1S-MF sponges

INCREASE VALUE

safer driving

HEADLIGHTS LIKE NEW

improved appearance

Save costs

DIGITAL BROCHURE

ORDER NOW!

If you have any questions or if you wish to place an order, contact your Area Sales Manager or telephone: 0800 136925 or email: kentsales.uk @ kenteurope.com

KENT (United Kingdom) Ltd, Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US www.kenteurope.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24